Units
Translation components API.
See the Weblate's Web API documentation for detailed description of the API.
GET /api/translations/yast-scanner/master/da/units/?format=api&page=3
{ "count": 162, "next": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/units/?format=api&page=4", "previous": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/units/?format=api&page=2", "results": [ { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "There is at least one printer configuration that uses the ptal service.\nIt is possible to proceed but then the running ptal service could prevent\n hp-setup from working correctly.\nIt is recommended to abort the scanner configuration now,\nstop the ptal service, change the printer configuration to use HPLIP,\nand start the scanner configuration again afterwards.\n" ], "previous_source": "", "target": [ "Der er mindst en printerkonfiguration, der bruger ptal-tjenesten.\n\u2029Det er muligt at fortsætte, men den kørende ptal-tjeneste kan forhindre,\n\u2029at hp-setup fungerer korrekt.\n\u2029Det anbefales at stoppe scannerkonfigurationen nu, at stoppe\n\u2029ptal-tjenesten, at ændre printerkonfigurationen til at benytte HPLIP,\n\u2029og starte scannerkonfigurationen igen bagefter.\n" ], "id_hash": 8018317124551377139, "content_hash": 8018317124551377139, "location": "src/modules/Scanner.rb:1086", "context": "", "note": "Message of a Popup::Error when hp-setup should be run.\nDo not change or translate \"ptal\", it is a service name.\nDo not change or translate \"hp-setup\", it is a program name.\nDo not change or translate \"HPLIP\", it is a subsystem name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 101, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 56, "source_unit": "https://l10n.opensuse.org/api/units/12581863/?format=api", "priority": 100, "id": 2404232, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=ef46c8f1215100f3", "url": "https://l10n.opensuse.org/api/units/2404232/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Cannot run hp-setup because no graphical display can be opened. \nThis happens if YaST runs in text-only mode, or the user who runs YaST \nhas no DISPLAY environment variable set, or if the YaST process is not \nallowed to access the graphical display. In this case, abort the scanner \nconfiguration, run hp-setup manually, and start the scanner configuration\nagain afterwards.\n" ], "previous_source": "", "target": [ "Kan ikke køre hp-setup, da intet grafisk skærmbillede kan åbnes. \nDette sker når YaST kører i teksttilstand, eller når brugeren, der kører YaST, \nikke har sat en miljøvariabel for DISPLAY, eller hvis YaST-processen ikke er \ntilladt adgang til den grafiske visning. I så fald bør du afbryde scannerkonfigurationen\nnu, køre hp-setup manuelt, og starte scannerkonfigurationen\nigen bagefter.\n" ], "id_hash": 7339157162894538065, "content_hash": 7339157162894538065, "location": "src/modules/Scanner.rb:1097", "context": "", "note": "Message of a Popup::Error when hp-setup should be run.\nDo not change or translate \"hp-setup\", it is a program name:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 102, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 60, "source_unit": "https://l10n.opensuse.org/api/units/12581864/?format=api", "priority": 100, "id": 2404234, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=e5d9ec8e1d17b551", "url": "https://l10n.opensuse.org/api/units/2404234/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "It seems hplip is not installed, which is required to run hp-setup.\nShould the hplip package be installed?\n" ], "previous_source": "", "target": [ "Tilsyneladende er hplip ikke installeret, hvilket kræves for at køre hp-setup.\nVil du installere pakken hplip?\n" ], "id_hash": 9182675703673723117, "content_hash": 9182675703673723117, "location": "src/modules/Scanner.rb:1109", "context": "", "note": "Message of a Popup::YesNo when hplip should be installed.\nDo not change or translate \"hp-setup\", it is a program name.\nDo not change or translate \"hplip\", it is a package name:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 103, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 18, "source_unit": "https://l10n.opensuse.org/api/units/12581865/?format=api", "priority": 100, "id": 2404236, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=ff6f6ae68d1518ed", "url": "https://l10n.opensuse.org/api/units/2404236/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Cannot run hp-setup because\n/usr/bin/hp-setup is not executable\nor does not exist.\n" ], "previous_source": "", "target": [ "Kan ikke køre hp-setup, da\n/usr/bin/hp-setup ikke er kørbar\neller ikke findes.\n" ], "id_hash": -2630329293739768038, "content_hash": -2630329293739768038, "location": "src/modules/Scanner.rb:1115", "context": "", "note": "Message of a Popup::Error when hp-setup should be run.\nDo not change or translate \"hp-setup\", it is a program name:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 104, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 12, "source_unit": "https://l10n.opensuse.org/api/units/12581866/?format=api", "priority": 100, "id": 2404238, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=5b7f31718456471a", "url": "https://l10n.opensuse.org/api/units/2404238/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Launched hp-setup.\nYou must finish hp-setup before you can proceed with the scanner configuration.\n" ], "previous_source": "", "target": [ "Startede hp-setup.\nDu skal færdiggøre hp-setup, før du kan gå videre med scannerkonfigurationen.\n" ], "id_hash": -8560423292360627852, "content_hash": -8560423292360627852, "location": "src/modules/Scanner.rb:1123", "context": "", "note": "Body of a Popup::ShowFeedback.\nDo not change or translate \"hp-setup\", it is a program name:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 105, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 14, "source_unit": "https://l10n.opensuse.org/api/units/12581867/?format=api", "priority": 100, "id": 2404240, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=0933445ee3dd6974", "url": "https://l10n.opensuse.org/api/units/2404240/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Not Configured:" ], "previous_source": "", "target": [ "Ikke konfigureret:" ], "id_hash": 5973686141740722863, "content_hash": 5973686141740722863, "location": "src/modules/Scanner.rb:1294", "context": "", "note": "\nwhere autodetected scanners are listed in the second column\nto denote those scanners which are not configured yet:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 106, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581868/?format=api", "priority": 100, "id": 2404242, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=d2e6cbe55e212aaf", "url": "https://l10n.opensuse.org/api/units/2404242/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Unknown device" ], "previous_source": "", "target": [ "Ukendt enhed" ], "id_hash": 2289839528214307557, "content_hash": 2289839528214307557, "location": "src/modules/Scanner.rb:1324, src/modules/Scanner.rb:2216", "context": "", "note": "Fallback device name if the real device name is missing:\nFallback device name if the real device name is missing:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 107, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581869/?format=api", "priority": 100, "id": 2404244, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=9fc724eb37dca2e5", "url": "https://l10n.opensuse.org/api/units/2404244/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Unknown manufacturer" ], "previous_source": "", "target": [ "Ukendt producent" ], "id_hash": 860941717331906938, "content_hash": 860941717331906938, "location": "src/modules/Scanner.rb:1330, src/modules/Scanner.rb:2204", "context": "", "note": "Fallback manufacturer name if the real manufacturer name is missing:\nFallback manufacturer name if the real manufacturer name is missing:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 108, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581870/?format=api", "priority": 100, "id": 2404246, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=8bf2adee31e2117a", "url": "https://l10n.opensuse.org/api/units/2404246/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Unknown model" ], "previous_source": "", "target": [ "Ukendt model" ], "id_hash": 4507091014684332817, "content_hash": 4507091014684332817, "location": "src/modules/Scanner.rb:1333, src/modules/Scanner.rb:2210", "context": "", "note": "Fallback model name if the real model name is missing:\nFallback model name if the real model name is missing:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 109, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581871/?format=api", "priority": 100, "id": 2404248, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=be8c6765f49d5311", "url": "https://l10n.opensuse.org/api/units/2404248/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "%1 %2 at %3" ], "previous_source": "", "target": [ "%1 %2 på %3" ], "id_hash": 5165565394018342995, "content_hash": 5165565394018342995, "location": "src/modules/Scanner.rb:1358, src/modules/Scanner.rb:2199", "context": "", "note": "%1 will be replaced by the manufacturer name\n%2 will be replaced by the model name\n%3 will be replaced by the device name\nwhere the scanner is connected to:\n%1 will be replaced by the manufacturer name\n%2 will be replaced by the model name\n%3 will be replaced by the device name where the scanner is connected to:", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 110, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 4, "source_unit": "https://l10n.opensuse.org/api/units/12581872/?format=api", "priority": 100, "id": 2404250, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=c7afc65b86839853", "url": "https://l10n.opensuse.org/api/units/2404250/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "No scanner recognized by this driver" ], "previous_source": "", "target": [ "Ingen scanner blev genkendt af denne driver" ], "id_hash": -7255782248163601844, "content_hash": -7255782248163601844, "location": "src/modules/Scanner.rb:1400", "context": "", "note": "A suffix for the second column of a table\nwhere active scanner drivers are listed in the first column\nto denote those drivers for which there is no matching active scanner:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 111, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581873/?format=api", "priority": 100, "id": 2404252, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=1b4e487cf29f924c", "url": "https://l10n.opensuse.org/api/units/2404252/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "No scanner was detected and no active scanner or driver exists." ], "previous_source": "", "target": [ "Der fandtes ingen scanner, og der findes ingen aktive scannere eller drivere." ], "id_hash": -5797578411177490611, "content_hash": -5797578411177490611, "location": "src/modules/Scanner.rb:1424", "context": "", "note": "A fallback list entry so that there is no empty list shown to the user\nwhen neither a scanner was autodetected\nnor an active scanner was found\nnor an active driver was found:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 112, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 11, "source_unit": "https://l10n.opensuse.org/api/units/12581874/?format=api", "priority": 100, "id": 2404254, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=2f8add26e44ac74d", "url": "https://l10n.opensuse.org/api/units/2404254/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Firmware upload required." ], "previous_source": "", "target": [ "Firmware-upload kræves." ], "id_hash": 4177886803660246788, "content_hash": 4177886803660246788, "location": "src/modules/Scanner.rb:1453", "context": "", "note": "Scanner model list firmware entry for models which require a firmware upload:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 113, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 3, "source_unit": "https://l10n.opensuse.org/api/units/12581875/?format=api", "priority": 100, "id": 2404256, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=b9fad5e99bf60f04", "url": "https://l10n.opensuse.org/api/units/2404256/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Third-party Image Scan driver software from Epson/Avasys required." ], "previous_source": "", "target": [ "Tredjepart Image Scan-driversoftware fra Epson/Avasys påkrævet." ], "id_hash": -7027339373015105177, "content_hash": -7027339373015105177, "location": "src/modules/Scanner.rb:1459", "context": "", "note": "Scanner model list entry for models which require\nthe third-party Image Scan (IScan) driver software from Epson/Avasys.\nDo not change or translate \"Image Scan\", it is a driver software name.\nDo not change or translate \"Avasys\", it is a manufacturer name.\nDo not change or translate \"Epson\", it is a manufacturer name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 114, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 8, "source_unit": "https://l10n.opensuse.org/api/units/12581876/?format=api", "priority": 100, "id": 2404258, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=1e79e0129b518167", "url": "https://l10n.opensuse.org/api/units/2404258/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Package %1" ], "previous_source": "", "target": [ "Pakken %1" ], "id_hash": -7446131862828262273, "content_hash": -7446131862828262273, "location": "src/modules/Scanner.rb:1525", "context": "", "note": "%1 will be replaced by the RPM package name\nwhich provides the driver for the particular model:", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 115, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581877/?format=api", "priority": 100, "id": 2404260, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=18aa0685a5675c7f", "url": "https://l10n.opensuse.org/api/units/2404260/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Unmaintained driver %1 may provide good functionality." ], "previous_source": "", "target": [ "Den ikke vedligeholdte driver %1 kan give god funktionalitet." ], "id_hash": 921515324081718994, "content_hash": 921515324081718994, "location": "src/modules/Scanner.rb:1546", "context": "", "note": "but where the backend (scanner driver) is unmaintained:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 116, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581878/?format=api", "priority": 100, "id": 2404262, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=8cc9e14e0af846d2", "url": "https://l10n.opensuse.org/api/units/2404262/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Driver %1 should provide good functionality." ], "previous_source": "", "target": [ "Driveren %1 bør give god funktionalitet." ], "id_hash": -9140711575623572394, "content_hash": -9140711575623572394, "location": "src/modules/Scanner.rb:1552", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 117, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581879/?format=api", "priority": 100, "id": 2404264, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=0125ab4064a7e456", "url": "https://l10n.opensuse.org/api/units/2404264/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "This scanner is not supported." ], "previous_source": "", "target": [ "Denne scanner er ikke understøttet." ], "id_hash": 3261667833997928490, "content_hash": 3261667833997928490, "location": "src/modules/Scanner.rb:1559", "context": "", "note": "Scanner model list status entry for \"good\" supported models:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 118, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 5, "source_unit": "https://l10n.opensuse.org/api/units/12581880/?format=api", "priority": 100, "id": 2404266, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=ad43c59d2cc3a82a", "url": "https://l10n.opensuse.org/api/units/2404266/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "This scanner is not supported by the driver %1." ], "previous_source": "", "target": [ "Denne scanner understøttes ikke af driveren %1." ], "id_hash": 6085221878867845743, "content_hash": 6085221878867845743, "location": "src/modules/Scanner.rb:1564", "context": "", "note": "which are listed as \"unsupported\" for a particular driver:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 119, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 9, "source_unit": "https://l10n.opensuse.org/api/units/12581881/?format=api", "priority": 100, "id": 2404268, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=d4730d0ed55a626f", "url": "https://l10n.opensuse.org/api/units/2404268/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Unmaintained driver %1 may provide complete functionality." ], "previous_source": "", "target": [ "Den ikke vedligeholdte driver %1 kan give fuld funktionalitet." ], "id_hash": 7915685601720659632, "content_hash": 7915685601720659632, "location": "src/modules/Scanner.rb:1574", "context": "", "note": "but where the backend (scanner driver) is unmaintained:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 120, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581882/?format=api", "priority": 100, "id": 2404270, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=edda2a1d9c3beeb0", "url": "https://l10n.opensuse.org/api/units/2404270/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Driver %1 should provide complete functionality." ], "previous_source": "", "target": [ "Driveren %1 bør give fuld funktionalitet." ], "id_hash": -5200935320063777725, "content_hash": -5200935320063777725, "location": "src/modules/Scanner.rb:1582", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 121, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581883/?format=api", "priority": 100, "id": 2404272, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=37d290e1d3d0e443", "url": "https://l10n.opensuse.org/api/units/2404272/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Driver %1 may work, but was not tested." ], "previous_source": "", "target": [ "Driveren %1 virker måske, men er ikke blevet testet." ], "id_hash": -927535312508635579, "content_hash": -927535312508635579, "location": "src/modules/Scanner.rb:1590", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 122, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 8, "source_unit": "https://l10n.opensuse.org/api/units/12581884/?format=api", "priority": 100, "id": 2404274, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=7320bb8c2d4ab645", "url": "https://l10n.opensuse.org/api/units/2404274/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Unmaintained driver %1 may provide basic functionality." ], "previous_source": "", "target": [ "Den ikke vedligeholdte driver %1 kan give basal funktionalitet." ], "id_hash": 8320317484467079769, "content_hash": 8320317484467079769, "location": "src/modules/Scanner.rb:1599", "context": "", "note": "but where the backend (scanner driver) is unmaintained:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 123, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581885/?format=api", "priority": 100, "id": 2404276, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=f377b4ab5021ca59", "url": "https://l10n.opensuse.org/api/units/2404276/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Driver %1 should provide basic functionality." ], "previous_source": "", "target": [ "Driveren %1 bør give basal funktionalitet." ], "id_hash": 3380031214943905575, "content_hash": 3380031214943905575, "location": "src/modules/Scanner.rb:1607", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 124, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581886/?format=api", "priority": 100, "id": 2404278, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=aee8487b5876a727", "url": "https://l10n.opensuse.org/api/units/2404278/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Unmaintained driver %1 may provide minimal functionality." ], "previous_source": "", "target": [ "Den ikke vedligeholdte driver %1 kan give minimal funktionalitet." ], "id_hash": -5952319383413592363, "content_hash": -5952319383413592363, "location": "src/modules/Scanner.rb:1617", "context": "", "note": "but where the backend (scanner driver) is unmaintained:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 125, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581887/?format=api", "priority": 100, "id": 2404280, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=2d651d0eb9f5eed5", "url": "https://l10n.opensuse.org/api/units/2404280/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Driver %1 should provide minimal functionality." ], "previous_source": "", "target": [ "Driveren %1 bør give minimal funktionalitet." ], "id_hash": 1309648591194958289, "content_hash": 1309648591194958289, "location": "src/modules/Scanner.rb:1625", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 126, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581888/?format=api", "priority": 100, "id": 2404282, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=922cce7472c429d1", "url": "https://l10n.opensuse.org/api/units/2404282/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Driver %1 may work, but the functionality is unknown." ], "previous_source": "", "target": [ "Driveren %1 virker måske, men hvor godt vides ikke." ], "id_hash": -8357292312085085003, "content_hash": -8357292312085085003, "location": "src/modules/Scanner.rb:1633", "context": "", "note": "which are listed but without a known support status:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 127, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 9, "source_unit": "https://l10n.opensuse.org/api/units/12581889/?format=api", "priority": 100, "id": 2404284, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=0c04eeebc610c4b5", "url": "https://l10n.opensuse.org/api/units/2404284/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "A firmware file contains software that must be uploaded to the scanner's memory.\nWithout firmware, the scanner cannot work.\n\nBecause firmware is licensed by the scanner manufacturer, we cannot distribute it.\nUsually the firmware file is stored somewhere on the manufacturer's CD.\nAlternatively, it may be possible to download it from the manufacturer's web site.\nAsk the manufacturer how to get the firmware file for your particular scanner.\nFind additional useful information on the SANE web site at\nhttp://www.sane-project.org/.\n\nAfter you get the firmware file, you must configure the driver manually.\nThe man page of the driver describes how to configure it for firmware upload.\nThe following command shows the man page for your driver:\n" ], "previous_source": "", "target": [ "En firmware-fil indeholder software der skal uploades til scannerens hukommelse.\nUden firmware virker scanneren ikke.\n\nDa firmware er licenseret af scannerproducenten, kan vi ikke distribuere den.\nSom regel kan man finde firmware-filen et sted på producentens cd.\nAlternativt kan man i mange tilfælde downloade den fra producentens hjemmeside.\nSpørg producenten, hvor du finder firmware til netop din scanner.\nFind yderligere nyttig information på SANE-hjemmesiden:\nhttp://www.sane-project.org/.\n\nNår du har skaffet firmware-filen, må du konfigurere driveren manuelt.\n\"man\"-siden for driveren beskriver, hvordan man konfigurerer firmware-upload.\nDen følgende kommando viser 'man'-siden for din driver:\n" ], "id_hash": -122559894315460399, "content_hash": -122559894315460399, "location": "src/modules/Scanner.rb:1884", "context": "", "note": "The body of a Popup::AnyMessage for scanners which require a firmware upload\nBelow this message on a seperated line a special command will be shown.\nThe \"somewhere\" is important because normally the firmware file is not simply\nstored on the manufacturer's CD but often it is buried in a weird Windows-only\ndriver archive format. The text must indicate this.\nDo not change or translate \"SANE\", it is a project name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 128, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 115, "source_unit": "https://l10n.opensuse.org/api/units/12581890/?format=api", "priority": 100, "id": 2404286, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=7e4c946ceb9e18d1", "url": "https://l10n.opensuse.org/api/units/2404286/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "There is at least one printer configuration that uses the ptal service.\nIt is possible to proceed but then the ptal service would be stopped\nand all print queues that use the ptal service would no longer work.\nIf you proceed, change the printer configuration to use HPLIP.\n" ], "previous_source": "", "target": [ "Der er mindst en printerkonfiguration, der bruger ptal-tjenesten.\nDet er muligt at fortsætte, men så stoppes ptal-tjenesten, og alle\nprintkøer, der bruger ptal-tjenesten, vil ikke virke længere.\nHvis du fortsætter, så ændr printerkonfigurationen til at benytte HPLIP.\n" ], "id_hash": 6919260945818056416, "content_hash": 6919260945818056416, "location": "src/modules/Scanner.rb:1903", "context": "", "note": "Message of a Popup::ContinueCancel for scanners which should be set up with the hpaio driver.\nDo not change or translate \"ptal\", it is a service name.\nDo not change or translate \"HPLIP\", it is a subsystem name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 129, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 48, "source_unit": "https://l10n.opensuse.org/api/units/12581891/?format=api", "priority": 100, "id": 2404288, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=e006272b9fb7f6e0", "url": "https://l10n.opensuse.org/api/units/2404288/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "The hpoj driver requires the PTAL system to be set up and running.\nIn particular, the ptal service must be up and running.\n\nBefore the ptal service can be started, the PTAL system must be initialized.\nAdditionally, the ptal service should be activated for start when booting.\nThe PTAL system and the hplip service exclude each other.\nTherefore a running hplip service would be stopped and deactivated\nbefore the the PTAL system is initialized, activated, and started.\nAn automated initialization of the PTAL system is only safe for USB.\nIf you have a non-USB device or if the automated initialization for USB fails,\nset up the PTAL system manually.\nIf you have an all-in-one device (scanner+printer), note that\na running ptal service monopolizes the USB device file (e.g., /dev/usb/lp0),\nso the printer can no longer be addressed via the USB device file.\n\nShould the PTAL system for USB be initialized, activated, and started now?\n" ], "previous_source": "", "target": [ "Driveren hpoj kræver, at PTAL-systemet sættes op og kører.\nI særdeleshed skal ptal tjeneste være oppe og køre.\n\nFør ptal-tjenesten kan startes, skal PTAL-systemet initialiseres.\nYderligere skal ptal-tjenesten sættes op til at starte under boot.\nPTAL-systemet og hplip-tjenesten udelukker hinanden.\nDerfor stoppes og deaktiveres hplip-tjenesten, før PTAL-systemet\ninitialiseres, aktiveres og startes.\nAutomatisk initialisering af PTAL-systemet er kun sikkert for USB.\nHvis du har en ikke-USB-enhed, eller hvis automatisk initialisering\naf USB mislykkes, så sæt PTAL-systemet op manuelt.\nHvis du har en alt-i-en enhed (scanner+printer), så bemærk at en\nkørende ptal-tjeneste monopoliserer USB-enhedsfilen (eks. /dev/usb/lp0),\nså printeren ikke længere kan tilgås via USB-enhedsfilen.\n\nSkal PTAL-systemet for USB initialiseres, aktiveres og startes nu?\n" ], "id_hash": -5385473855890102980, "content_hash": -5385473855890102980, "location": "src/modules/Scanner.rb:1915", "context": "", "note": "Message of a Popup::YesNo for scanners which should be set up with the hpoj driver\nDo not change or translate \"hpoj\", it is a driver name.\nDo not change or translate \"PTAL\", it is a subsystem name.\nDo not change or translate \"ptal\", it is a service name.\nDo not change or translate \"hplip\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 130, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 154, "source_unit": "https://l10n.opensuse.org/api/units/12581892/?format=api", "priority": 100, "id": 2404290, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=3542f40fc084653c", "url": "https://l10n.opensuse.org/api/units/2404290/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "There is at least one printer configuration that uses the hplip service.\nIt is possible to proceed but then the hplip service would be stopped\nand all print queues that use the hplip service would no longer work.\nIf the scanner is also supported by the hpaio driver, do not proceed.\nInstead use hpaio to set up the scanner.\nAlternatively proceed and change the printer configuration to use the ptal service.\n" ], "previous_source": "", "target": [ "Der er mindst en printerkonfiguration, der bruger hplip-tjenesten.\nDet er muligt at fortsætte, men hplip-tjenesten stoppes, og alle\nprintkøer, der bruger hplip-tjenesten, vil ikke længere virke.\nHvis scanneren også understøttes af hpaio-driveren, så fortsæt ikke.\nBenyt i stedet hpaio til at sætte scanneren op.\nAlternativt kan du fortsætte og ændre printerkonfigurationen til at bruge ptal-tjenesten.\n" ], "id_hash": -5674606619569471867, "content_hash": -5674606619569471867, "location": "src/modules/Scanner.rb:1938", "context": "", "note": "Message of a Popup::ContinueCancel for scanners which should be set up with the hpoj driver.\nDo not change or translate \"hplip\", it is a service name.\nDo not change or translate \"hpaio\", it is a driver name.\nDo not change or translate \"ptal\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 131, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 71, "source_unit": "https://l10n.opensuse.org/api/units/12581893/?format=api", "priority": 100, "id": 2404292, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=313fbf58487b3e85", "url": "https://l10n.opensuse.org/api/units/2404292/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Setting Up Driver %1" ], "previous_source": "", "target": [ "Sætter driveren %1 op" ], "id_hash": 6626185042598185421, "content_hash": 6626185042598185421, "location": "src/modules/Scanner.rb:1974", "context": "", "note": "%1 will be replaced by the backend name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 132, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 4, "source_unit": "https://l10n.opensuse.org/api/units/12581894/?format=api", "priority": 100, "id": 2404294, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=dbf4f030701249cd", "url": "https://l10n.opensuse.org/api/units/2404294/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Check whether additional packages must be installed" ], "previous_source": "", "target": [ "Tjekker om yderligere pakker skal installeres" ], "id_hash": -2691590574659066874, "content_hash": -2691590574659066874, "location": "src/modules/Scanner.rb:1978", "context": "", "note": "", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 133, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581895/?format=api", "priority": 100, "id": 2404296, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=5aa58ca20ca82406", "url": "https://l10n.opensuse.org/api/units/2404296/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Check whether firmware upload is required" ], "previous_source": "", "target": [ "Tjek om firmware-upload kræves" ], "id_hash": -7708449197766813785, "content_hash": -7708449197766813785, "location": "src/modules/Scanner.rb:1980", "context": "", "note": "2. progress stage name of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 134, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581896/?format=api", "priority": 100, "id": 2404298, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=1506164bb5f6d7a7", "url": "https://l10n.opensuse.org/api/units/2404298/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Test and set up special requirements for particular drivers" ], "previous_source": "", "target": [ "Test og indstil specielle krav for særlige drivere" ], "id_hash": -3141849563258885606, "content_hash": -3141849563258885606, "location": "src/modules/Scanner.rb:1982", "context": "", "note": "3. progress stage name of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 135, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 9, "source_unit": "https://l10n.opensuse.org/api/units/12581897/?format=api", "priority": 100, "id": 2404300, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=5465e877ec3cea1a", "url": "https://l10n.opensuse.org/api/units/2404300/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Activate the driver" ], "previous_source": "", "target": [ "Aktivér driveren" ], "id_hash": 7128499841077769319, "content_hash": 7128499841077769319, "location": "src/modules/Scanner.rb:1984", "context": "", "note": "4. progress stage name of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 136, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 3, "source_unit": "https://l10n.opensuse.org/api/units/12581898/?format=api", "priority": 100, "id": 2404302, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=e2ed84d648de7467", "url": "https://l10n.opensuse.org/api/units/2404302/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Checking whether additional packages must be installed..." ], "previous_source": "", "target": [ "Tjekker om yderligere pakker skal installeres..." ], "id_hash": -9125811272496513264, "content_hash": -9125811272496513264, "location": "src/modules/Scanner.rb:1989", "context": "", "note": "1. progress stage name of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 137, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581899/?format=api", "priority": 100, "id": 2404304, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=015a9aff8f96ff10", "url": "https://l10n.opensuse.org/api/units/2404304/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Checking whether firmware upload is required..." ], "previous_source": "", "target": [ "Tjekker om firmware-upload kræves..." ], "id_hash": -661412690724567035, "content_hash": -661412690724567035, "location": "src/modules/Scanner.rb:1991", "context": "", "note": "2. progress step progress bar title of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 138, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581900/?format=api", "priority": 100, "id": 2404306, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=76d230a97f6d4805", "url": "https://l10n.opensuse.org/api/units/2404306/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Testing and setting up special requirements for particular drivers..." ], "previous_source": "", "target": [ "Tester og indstiller specielle krav for særlige drivere..." ], "id_hash": -9085720589161677718, "content_hash": -9085720589161677718, "location": "src/modules/Scanner.rb:1993", "context": "", "note": "3. progress step progress bar title of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 139, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 9, "source_unit": "https://l10n.opensuse.org/api/units/12581901/?format=api", "priority": 100, "id": 2404308, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=01e909432a90bc6a", "url": "https://l10n.opensuse.org/api/units/2404308/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Activating the driver..." ], "previous_source": "", "target": [ "Aktiverer driveren..." ], "id_hash": 4248515941297408627, "content_hash": 4248515941297408627, "location": "src/modules/Scanner.rb:1997", "context": "", "note": "\n4. progress step progress bar title of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 140, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 3, "source_unit": "https://l10n.opensuse.org/api/units/12581902/?format=api", "priority": 100, "id": 2404310, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=baf5c2bd2f9dca73", "url": "https://l10n.opensuse.org/api/units/2404310/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Required Package Not Installed" ], "previous_source": "", "target": [ "Krævet pakke er ikke installeret" ], "id_hash": 3777209297419394770, "content_hash": 3777209297419394770, "location": "src/modules/Scanner.rb:2018", "context": "", "note": "\nthe third-party Image Scan driver software from Epson/Avasys:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 141, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 4, "source_unit": "https://l10n.opensuse.org/api/units/12581903/?format=api", "priority": 100, "id": 2404312, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=b46b57d7eefc5ed2", "url": "https://l10n.opensuse.org/api/units/2404312/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "The driver %1 requires the package %2." ], "previous_source": "", "target": [ "Driveren %1 kræver pakken %2." ], "id_hash": -1832163102550855871, "content_hash": -1832163102550855871, "location": "src/modules/Scanner.rb:2026", "context": "", "note": "Body of a Popup::AnyMessage where\n%1 will be replaced by the backend name\n%2 will be replaced by the package name\nOnly a simple message because before there was a dialog\nwhich let the user install the package so that this message is shown\nif the user has explicitly rejected to install it.", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 142, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581904/?format=api", "priority": 100, "id": 2404314, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=6692d95d8de0ef41", "url": "https://l10n.opensuse.org/api/units/2404314/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Aborted" ], "previous_source": "", "target": [ "Afbrudt" ], "id_hash": -1851427209754883300, "content_hash": -1851427209754883300, "location": "src/modules/Scanner.rb:2032, src/modules/Scanner.rb:2073, src/modules/Scanner.rb:2106, src/modules/Scanner.rb:2117", "context": "", "note": "The ptal service is associated with the hpoj backend.\nIt may happen that the conflicting service hplip is in use by the printing system.\nThe hplip service is associated with the hpaoi backend.\nActivate the backend via bash script:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 143, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 1, "source_unit": "https://l10n.opensuse.org/api/units/12581905/?format=api", "priority": 100, "id": 2404316, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=664e68c313114b1c", "url": "https://l10n.opensuse.org/api/units/2404316/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Firmware Upload Required" ], "previous_source": "", "target": [ "Firmware-upload kræves" ], "id_hash": -3159122480353654839, "content_hash": -3159122480353654839, "location": "src/modules/Scanner.rb:2052", "context": "", "note": "Some scanners require a firmware upload to become ready to operate.\nWhen building the sane package ':firmware \"required\"' entries have been\nadded for the respective scanners to the appropriate descriptions files.\nSee the sane.spec file of the sane package.\nThis makes only sense if a database_index was specified\nbecause which scanner requires firmware upload is stored in the database\nand additionally user confirmation must be requested.\nOtherwise skip this section.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 144, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 3, "source_unit": "https://l10n.opensuse.org/api/units/12581906/?format=api", "priority": 100, "id": 2404318, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=54288ad78491c7c9", "url": "https://l10n.opensuse.org/api/units/2404318/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "If the ptal service is not running, the scanner cannot work." ], "previous_source": "", "target": [ "Hvis ptal-tjenesten ikke kører, kan scanneren ikke fungere." ], "id_hash": 7175041647810082304, "content_hash": 7175041647810082304, "location": "src/modules/Scanner.rb:2096", "context": "", "note": "Message of a Popup::Warning for scanners which should be set up with the hpoj backend.\nOnly a simple message because before there was a Popup::YesNo\nwhich asked the user whether he wants to let YaST activate the ptal service\nso that this message is shown if the user has explicitly rejected to do it.\nDo not change or translate \"ptal\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 145, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 11, "source_unit": "https://l10n.opensuse.org/api/units/12581907/?format=api", "priority": 100, "id": 2404320, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=e392de5d1a5a7600", "url": "https://l10n.opensuse.org/api/units/2404320/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "The following scanners use the same driver.\nTherefore all those scanners will be deactivated:" ], "previous_source": "", "target": [ "Følgende scannere benytter den samme driver.\nDerfor deaktiveres alle disse scannere:" ], "id_hash": 4500828722560963427, "content_hash": 4500828722560963427, "location": "src/modules/Scanner.rb:2191", "context": "", "note": "Header message for a list of scanners which will be deactivated:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 146, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 14, "source_unit": "https://l10n.opensuse.org/api/units/12581908/?format=api", "priority": 100, "id": 2404324, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=be7627e0731f1363", "url": "https://l10n.opensuse.org/api/units/2404324/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "The driver hpoj is deactivated but the associated service ptal is not deactivated because it is needed by the CUPS printing system." ], "previous_source": "", "target": [ "Driveren hpoj er deaktiveret, men den associerede tjeneste ptal er ikke deaktiveret, da printsystemet CUPS behøver den." ], "id_hash": 4756263828363323140, "content_hash": 4756263828363323140, "location": "src/modules/Scanner.rb:2259", "context": "", "note": "Only a simple message because everything is perfectly o.k.\nbut the user should get a notification\nwhy the ptal service must be still active.\nThis works only if the CUPS printing system is used.\nDo not change or translate \"hpoj\", it is a driver name.\nDo not change or translate \"ptal\", it is a service name.\nDo not change or translate \"CUPS\", it is a subsystem name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 147, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 22, "source_unit": "https://l10n.opensuse.org/api/units/12581909/?format=api", "priority": 100, "id": 2404326, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=c201a4c08ba2a704", "url": "https://l10n.opensuse.org/api/units/2404326/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Failed to stop the ptal service." ], "previous_source": "", "target": [ "Stop af ptal-tjenesten mislykkedes." ], "id_hash": -587052834702632924, "content_hash": -587052834702632924, "location": "src/modules/Scanner.rb:2274", "context": "", "note": "(i.e. a system which is not totally broken or totally messed up).\nDo not change or translate \"ptal\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 148, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581910/?format=api", "priority": 100, "id": 2404328, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=77da5e8ea329d824", "url": "https://l10n.opensuse.org/api/units/2404328/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "Failed to disable the ptal service." ], "previous_source": "", "target": [ "Deaktivering af ptal-tjenesten mislykkedes." ], "id_hash": 334208146655999911, "content_hash": 334208146655999911, "location": "src/modules/Scanner.rb:2285", "context": "", "note": "\n(i.e. a system which is not totally broken or totally messed up).\nDo not change or translate \"ptal\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 149, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581911/?format=api", "priority": 100, "id": 2404330, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=84a35889e678f7a7", "url": "https://l10n.opensuse.org/api/units/2404330/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/da/?format=api", "source": [ "No Scanner for %1" ], "previous_source": "", "target": [ "Ingen scanner for %1" ], "id_hash": -6741619051914277258, "content_hash": -6741619051914277258, "location": "src/modules/Scanner.rb:2344", "context": "", "note": "If there is no active scanner for the backend\nthen show a message but exit successfully because\nit is no error when there is no active scanner for the backend:", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 150, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 4, "source_unit": "https://l10n.opensuse.org/api/units/12581912/?format=api", "priority": 100, "id": 2404332, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/da/?checksum=2270f530dfa4ce76", "url": "https://l10n.opensuse.org/api/units/2404332/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" } ] }