Units
Translation components API.
See the Weblate's Web API documentation for detailed description of the API.
GET /api/translations/yast-scanner/master/sk/units/?format=api&page=3
{ "count": 162, "next": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/units/?format=api&page=4", "previous": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/units/?format=api&page=2", "results": [ { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "There is at least one printer configuration that uses the ptal service.\nIt is possible to proceed but then the running ptal service could prevent\n hp-setup from working correctly.\nIt is recommended to abort the scanner configuration now,\nstop the ptal service, change the printer configuration to use HPLIP,\nand start the scanner configuration again afterwards.\n" ], "previous_source": "", "target": [ "Máte aspoň jednu konfiguráciu skenera, ktorá používa službu ptal.\nJe možné pokračovať, ale v takom prípade by mohla služba ptal brániť\nhp-setup správne fungovať.\nJe doporučené prerušiť konfiguráciu skenera,\nzastaviť ptal službu, zmeniť konfiguráciu tlačiarne pre použitie HPLIP,\na potom spustiť znovu konfiguráciu skenera.\n" ], "id_hash": 8018317124551377139, "content_hash": 8018317124551377139, "location": "src/modules/Scanner.rb:1086", "context": "", "note": "Message of a Popup::Error when hp-setup should be run.\nDo not change or translate \"ptal\", it is a service name.\nDo not change or translate \"hp-setup\", it is a program name.\nDo not change or translate \"HPLIP\", it is a subsystem name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 101, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 56, "source_unit": "https://l10n.opensuse.org/api/units/12581863/?format=api", "priority": 100, "id": 2419554, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=ef46c8f1215100f3", "url": "https://l10n.opensuse.org/api/units/2419554/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Cannot run hp-setup because no graphical display can be opened. \nThis happens if YaST runs in text-only mode, or the user who runs YaST \nhas no DISPLAY environment variable set, or if the YaST process is not \nallowed to access the graphical display. In this case, abort the scanner \nconfiguration, run hp-setup manually, and start the scanner configuration\nagain afterwards.\n" ], "previous_source": "", "target": [ "Nie je možné spustiť hp-setup, pretože nemôže byť otvorený žiadny grafický displej. \nToto sa stáva, keď YaST beží iba v textovom režime, alebo keď používateľ, \nktorý spustil YaST, nemá nastavenú premennú prostredia DISPLAY, \nalebo keď YaST proces nemá povolený prístup ku grafickému displeju.\nV takom prípade prerušiť konfiguráciu skenera, spustiť hp-setup ručne \na potom znovu spustiť konfiguráciu skenera.\n" ], "id_hash": 7339157162894538065, "content_hash": 7339157162894538065, "location": "src/modules/Scanner.rb:1097", "context": "", "note": "Message of a Popup::Error when hp-setup should be run.\nDo not change or translate \"hp-setup\", it is a program name:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 102, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 60, "source_unit": "https://l10n.opensuse.org/api/units/12581864/?format=api", "priority": 100, "id": 2419556, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=e5d9ec8e1d17b551", "url": "https://l10n.opensuse.org/api/units/2419556/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "It seems hplip is not installed, which is required to run hp-setup.\nShould the hplip package be installed?\n" ], "previous_source": "", "target": [ "Zdá sa, že hplip, ktorý je vyžadovaný pre beh hp-setup, nie je nainštalovaný.\nMal by byť balík hplip nainštalovaný?\n" ], "id_hash": 9182675703673723117, "content_hash": 9182675703673723117, "location": "src/modules/Scanner.rb:1109", "context": "", "note": "Message of a Popup::YesNo when hplip should be installed.\nDo not change or translate \"hp-setup\", it is a program name.\nDo not change or translate \"hplip\", it is a package name:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 103, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 18, "source_unit": "https://l10n.opensuse.org/api/units/12581865/?format=api", "priority": 100, "id": 2419558, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=ff6f6ae68d1518ed", "url": "https://l10n.opensuse.org/api/units/2419558/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Cannot run hp-setup because\n/usr/bin/hp-setup is not executable\nor does not exist.\n" ], "previous_source": "", "target": [ "Nedá sa spustiť hp-setup, pretože\n/usr/bin/hp-setup nie je spustiteľný, alebo\nneexistuje.\n" ], "id_hash": -2630329293739768038, "content_hash": -2630329293739768038, "location": "src/modules/Scanner.rb:1115", "context": "", "note": "Message of a Popup::Error when hp-setup should be run.\nDo not change or translate \"hp-setup\", it is a program name:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 104, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 12, "source_unit": "https://l10n.opensuse.org/api/units/12581866/?format=api", "priority": 100, "id": 2419560, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=5b7f31718456471a", "url": "https://l10n.opensuse.org/api/units/2419560/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Launched hp-setup.\nYou must finish hp-setup before you can proceed with the scanner configuration.\n" ], "previous_source": "", "target": [ "Spustený hp-setup.\nAby ste mohli pokračovať v nastavení skenera, musíte dokončiť hp-setup.\n" ], "id_hash": -8560423292360627852, "content_hash": -8560423292360627852, "location": "src/modules/Scanner.rb:1123", "context": "", "note": "Body of a Popup::ShowFeedback.\nDo not change or translate \"hp-setup\", it is a program name:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 105, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 14, "source_unit": "https://l10n.opensuse.org/api/units/12581867/?format=api", "priority": 100, "id": 2419562, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=0933445ee3dd6974", "url": "https://l10n.opensuse.org/api/units/2419562/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Not Configured:" ], "previous_source": "", "target": [ "Nakonfigurované:" ], "id_hash": 5973686141740722863, "content_hash": 5973686141740722863, "location": "src/modules/Scanner.rb:1294", "context": "", "note": "where autodetected scanners are listed in the second column\nto denote those scanners which are not configured yet:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 106, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581868/?format=api", "priority": 100, "id": 2419564, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=d2e6cbe55e212aaf", "url": "https://l10n.opensuse.org/api/units/2419564/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Unknown device" ], "previous_source": "", "target": [ "Neznáme zariadenie" ], "id_hash": 2289839528214307557, "content_hash": 2289839528214307557, "location": "src/modules/Scanner.rb:1324, src/modules/Scanner.rb:2216", "context": "", "note": " device name (CPU model name string has key \"name\" instead of \"model\")\n device model name fallback\n device model is unknown\n device model name is unknown\nFallback device name if the real device name is missing:\nFallback device name if the real device name is missing:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 107, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581869/?format=api", "priority": 100, "id": 2419566, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=9fc724eb37dca2e5", "url": "https://l10n.opensuse.org/api/units/2419566/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Unknown manufacturer" ], "previous_source": "", "target": [ "neznámy výrobca" ], "id_hash": 860941717331906938, "content_hash": 860941717331906938, "location": "src/modules/Scanner.rb:1330, src/modules/Scanner.rb:2204", "context": "", "note": " command line error report, %1 is manufacturer name\nFallback manufacturer name if the real manufacturer name is missing:\nFallback manufacturer name if the real manufacturer name is missing:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 108, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581870/?format=api", "priority": 100, "id": 2419568, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=8bf2adee31e2117a", "url": "https://l10n.opensuse.org/api/units/2419568/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Unknown model" ], "previous_source": "", "target": [ "neznámy model" ], "id_hash": 4507091014684332817, "content_hash": 4507091014684332817, "location": "src/modules/Scanner.rb:1333, src/modules/Scanner.rb:2210", "context": "", "note": " monitor model not known\nFallback model name if the real model name is missing:\nFallback model name if the real model name is missing:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 109, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581871/?format=api", "priority": 100, "id": 2419570, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=be8c6765f49d5311", "url": "https://l10n.opensuse.org/api/units/2419570/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "%1 %2 at %3" ], "previous_source": "", "target": [ "%1 %2 na %3" ], "id_hash": 5165565394018342995, "content_hash": 5165565394018342995, "location": "src/modules/Scanner.rb:1358, src/modules/Scanner.rb:2199", "context": "", "note": " selection box entry, %1 is printer manufacturer, %2 model\n %3 device, eg. EPSON Stylus Photo 810 on /dev/usb/lp0\n%1 will be replaced by the manufacturer name\n%2 will be replaced by the model name\n%3 will be replaced by the device name\nwhere the scanner is connected to:\n%1 will be replaced by the manufacturer name\n%2 will be replaced by the model name\n%3 will be replaced by the device name where the scanner is connected to:", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 110, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 4, "source_unit": "https://l10n.opensuse.org/api/units/12581872/?format=api", "priority": 100, "id": 2419572, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=c7afc65b86839853", "url": "https://l10n.opensuse.org/api/units/2419572/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "No scanner recognized by this driver" ], "previous_source": "", "target": [ "Nie je rozpoznaný žiadny skener týmto ovládačom" ], "id_hash": -7255782248163601844, "content_hash": -7255782248163601844, "location": "src/modules/Scanner.rb:1400", "context": "", "note": "A suffix for the second column of a table\nwhere active scanner drivers are listed in the first column\nto denote those drivers for which there is no matching active scanner:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 111, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581873/?format=api", "priority": 100, "id": 2419574, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=1b4e487cf29f924c", "url": "https://l10n.opensuse.org/api/units/2419574/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "No scanner was detected and no active scanner or driver exists." ], "previous_source": "", "target": [ "Nebol nájdený žiadny skener a neexistuje žiadny aktívny skener, alebo ovládač." ], "id_hash": -5797578411177490611, "content_hash": -5797578411177490611, "location": "src/modules/Scanner.rb:1424", "context": "", "note": "A fallback list entry so that there is no empty list shown to the user\nwhen neither a scanner was autodetected\nnor an active scanner was found\nnor an active driver was found:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 112, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 11, "source_unit": "https://l10n.opensuse.org/api/units/12581874/?format=api", "priority": 100, "id": 2419576, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=2f8add26e44ac74d", "url": "https://l10n.opensuse.org/api/units/2419576/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Firmware upload required." ], "previous_source": "", "target": [ "Potrebné nahratie firmvéru." ], "id_hash": 4177886803660246788, "content_hash": 4177886803660246788, "location": "src/modules/Scanner.rb:1453", "context": "", "note": "Scanner model list firmware entry for models which require a firmware upload:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 113, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 3, "source_unit": "https://l10n.opensuse.org/api/units/12581875/?format=api", "priority": 100, "id": 2419578, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=b9fad5e99bf60f04", "url": "https://l10n.opensuse.org/api/units/2419578/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Third-party Image Scan driver software from Epson/Avasys required." ], "previous_source": "", "target": [ "Vyžaduje sa softvér ovládača tretích strán Image Scan od Epson/Avasys." ], "id_hash": -7027339373015105177, "content_hash": -7027339373015105177, "location": "src/modules/Scanner.rb:1459", "context": "", "note": "Scanner model list entry for models which require\nthe third-party Image Scan (IScan) driver software from Epson/Avasys.\nDo not change or translate \"Image Scan\", it is a driver software name.\nDo not change or translate \"Avasys\", it is a manufacturer name.\nDo not change or translate \"Epson\", it is a manufacturer name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 114, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 8, "source_unit": "https://l10n.opensuse.org/api/units/12581876/?format=api", "priority": 100, "id": 2419580, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=1e79e0129b518167", "url": "https://l10n.opensuse.org/api/units/2419580/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Package %1" ], "previous_source": "", "target": [ "Balík %1" ], "id_hash": -7446131862828262273, "content_hash": -7446131862828262273, "location": "src/modules/Scanner.rb:1525", "context": "", "note": "%1 will be replaced by the RPM package name\nwhich provides the driver for the particular model:", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 115, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 2, "source_unit": "https://l10n.opensuse.org/api/units/12581877/?format=api", "priority": 100, "id": 2419582, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=18aa0685a5675c7f", "url": "https://l10n.opensuse.org/api/units/2419582/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Unmaintained driver %1 may provide good functionality." ], "previous_source": "", "target": [ "Neudržovaný ovládač %1 môže poskytovať dobrú funkcionalitu." ], "id_hash": 921515324081718994, "content_hash": 921515324081718994, "location": "src/modules/Scanner.rb:1546", "context": "", "note": "but where the backend (scanner driver) is unmaintained:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 116, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581878/?format=api", "priority": 100, "id": 2419584, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=8cc9e14e0af846d2", "url": "https://l10n.opensuse.org/api/units/2419584/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Driver %1 should provide good functionality." ], "previous_source": "", "target": [ "Ovládač %1 by mal poskytovať dobrú funkcionalitu." ], "id_hash": -9140711575623572394, "content_hash": -9140711575623572394, "location": "src/modules/Scanner.rb:1552", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 117, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581879/?format=api", "priority": 100, "id": 2419586, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=0125ab4064a7e456", "url": "https://l10n.opensuse.org/api/units/2419586/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "This scanner is not supported." ], "previous_source": "", "target": [ "Tento skener nie je podporovaný." ], "id_hash": 3261667833997928490, "content_hash": 3261667833997928490, "location": "src/modules/Scanner.rb:1559", "context": "", "note": "Scanner model list status entry for \"good\" supported models:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 118, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 5, "source_unit": "https://l10n.opensuse.org/api/units/12581880/?format=api", "priority": 100, "id": 2419588, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=ad43c59d2cc3a82a", "url": "https://l10n.opensuse.org/api/units/2419588/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "This scanner is not supported by the driver %1." ], "previous_source": "", "target": [ "Tento skener nie je podporovaný ovládačom %1." ], "id_hash": 6085221878867845743, "content_hash": 6085221878867845743, "location": "src/modules/Scanner.rb:1564", "context": "", "note": "which are listed as \"unsupported\" for a particular driver:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 119, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 9, "source_unit": "https://l10n.opensuse.org/api/units/12581881/?format=api", "priority": 100, "id": 2419590, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=d4730d0ed55a626f", "url": "https://l10n.opensuse.org/api/units/2419590/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Unmaintained driver %1 may provide complete functionality." ], "previous_source": "", "target": [ "Neudržovaný ovládač %1 môže poskytovať kompletnú funkcionalitu." ], "id_hash": 7915685601720659632, "content_hash": 7915685601720659632, "location": "src/modules/Scanner.rb:1574", "context": "", "note": "but where the backend (scanner driver) is unmaintained:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 120, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581882/?format=api", "priority": 100, "id": 2419592, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=edda2a1d9c3beeb0", "url": "https://l10n.opensuse.org/api/units/2419592/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:36Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Driver %1 should provide complete functionality." ], "previous_source": "", "target": [ "Ovládač %1 by mal poskytovať kompletnú funkcionalitu." ], "id_hash": -5200935320063777725, "content_hash": -5200935320063777725, "location": "src/modules/Scanner.rb:1582", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 121, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581883/?format=api", "priority": 100, "id": 2419594, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=37d290e1d3d0e443", "url": "https://l10n.opensuse.org/api/units/2419594/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Driver %1 may work, but was not tested." ], "previous_source": "", "target": [ "Ovládač %1 môže fungovať, ale nebolo to otestované." ], "id_hash": -927535312508635579, "content_hash": -927535312508635579, "location": "src/modules/Scanner.rb:1590", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 122, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 8, "source_unit": "https://l10n.opensuse.org/api/units/12581884/?format=api", "priority": 100, "id": 2419596, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=7320bb8c2d4ab645", "url": "https://l10n.opensuse.org/api/units/2419596/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Unmaintained driver %1 may provide basic functionality." ], "previous_source": "", "target": [ "Neudržovaný ovládač %1 môže poskytovať základnú funkcionalitu." ], "id_hash": 8320317484467079769, "content_hash": 8320317484467079769, "location": "src/modules/Scanner.rb:1599", "context": "", "note": "but where the backend (scanner driver) is unmaintained:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 123, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581885/?format=api", "priority": 100, "id": 2419598, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=f377b4ab5021ca59", "url": "https://l10n.opensuse.org/api/units/2419598/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Driver %1 should provide basic functionality." ], "previous_source": "", "target": [ "Ovládač %1 by mal poskytovať základnú funkcionalitu." ], "id_hash": 3380031214943905575, "content_hash": 3380031214943905575, "location": "src/modules/Scanner.rb:1607", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 124, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581886/?format=api", "priority": 100, "id": 2419600, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=aee8487b5876a727", "url": "https://l10n.opensuse.org/api/units/2419600/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Unmaintained driver %1 may provide minimal functionality." ], "previous_source": "", "target": [ "Neudržovaný ovládač %1 môže poskytovať minimálnu funkcionalitu." ], "id_hash": -5952319383413592363, "content_hash": -5952319383413592363, "location": "src/modules/Scanner.rb:1617", "context": "", "note": "but where the backend (scanner driver) is unmaintained:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 125, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581887/?format=api", "priority": 100, "id": 2419602, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=2d651d0eb9f5eed5", "url": "https://l10n.opensuse.org/api/units/2419602/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Driver %1 should provide minimal functionality." ], "previous_source": "", "target": [ "Ovládač %1 by mal poskytovať minimálnu funkcionalitu." ], "id_hash": 1309648591194958289, "content_hash": 1309648591194958289, "location": "src/modules/Scanner.rb:1625", "context": "", "note": "%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 126, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581888/?format=api", "priority": 100, "id": 2419604, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=922cce7472c429d1", "url": "https://l10n.opensuse.org/api/units/2419604/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Driver %1 may work, but the functionality is unknown." ], "previous_source": "", "target": [ "Ovládač %1 môže fungovať, ale funkcionalita nie je známa." ], "id_hash": -8357292312085085003, "content_hash": -8357292312085085003, "location": "src/modules/Scanner.rb:1633", "context": "", "note": "which are listed but without a known support status:\n%1 will be replaced by the backend (scanner driver) name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 127, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 9, "source_unit": "https://l10n.opensuse.org/api/units/12581889/?format=api", "priority": 100, "id": 2419606, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=0c04eeebc610c4b5", "url": "https://l10n.opensuse.org/api/units/2419606/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "A firmware file contains software that must be uploaded to the scanner's memory.\nWithout firmware, the scanner cannot work.\n\nBecause firmware is licensed by the scanner manufacturer, we cannot distribute it.\nUsually the firmware file is stored somewhere on the manufacturer's CD.\nAlternatively, it may be possible to download it from the manufacturer's web site.\nAsk the manufacturer how to get the firmware file for your particular scanner.\nFind additional useful information on the SANE web site at\nhttp://www.sane-project.org/.\n\nAfter you get the firmware file, you must configure the driver manually.\nThe man page of the driver describes how to configure it for firmware upload.\nThe following command shows the man page for your driver:\n" ], "previous_source": "", "target": [ "Súbor s firmvérom obsahuje softvér, ktorý musí byť nahratý do pamäte skenera.\nBez firmvéru skener nebude pracovať.\n\nNakoľko firmvér podlieha licencii výrobcu, nemôžme ho distribuovať.\nObvykle je uložený na CD od výrobcu.\nJe tiež možné že sa dá stiahnuť z webovej stránky výrobcu.\nZistite si u výrobcu, ako získať firmvér pre Váš skener.\nĎalšie informácie môžete nájsť na webovej stránke SANE:\nhttp://www.sane-project.org/\n\nKeď súbor s firmvérom získate, musíte ovládač nakonfigurovať manuálne.\nManuálová stránka ovládača popisuje ako ho nakonfigurovať pre nahratie firmvéru.\nManuálovú stránku pre váš ovládač zobrazí nasledujúci príkaz:\n" ], "id_hash": -122559894315460399, "content_hash": -122559894315460399, "location": "src/modules/Scanner.rb:1884", "context": "", "note": "The body of a Popup::AnyMessage for scanners which require a firmware upload\nBelow this message on a seperated line a special command will be shown.\nThe \"somewhere\" is important because normally the firmware file is not simply\nstored on the manufacturer's CD but often it is buried in a weird Windows-only\ndriver archive format. The text must indicate this.\nDo not change or translate \"SANE\", it is a project name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 128, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 115, "source_unit": "https://l10n.opensuse.org/api/units/12581890/?format=api", "priority": 100, "id": 2419608, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=7e4c946ceb9e18d1", "url": "https://l10n.opensuse.org/api/units/2419608/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "There is at least one printer configuration that uses the ptal service.\nIt is possible to proceed but then the ptal service would be stopped\nand all print queues that use the ptal service would no longer work.\nIf you proceed, change the printer configuration to use HPLIP.\n" ], "previous_source": "", "target": [ "Existujúci aspoň jedna konfigurácia tlačiarne, ktorá používa službu ptal.\nJe možné pokračovať, ale v takom prípade by bola služba ptal zastavená\na všetky tlačové fronty, ktoré ju používajú, by ďalej nefungovali.\nKeď budete pokračovať, zmeňte konfiguráciu tlačiarne pre používanie HPLIP.\n" ], "id_hash": 6919260945818056416, "content_hash": 6919260945818056416, "location": "src/modules/Scanner.rb:1903", "context": "", "note": "Message of a Popup::ContinueCancel for scanners which should be set up with the hpaio driver.\nDo not change or translate \"ptal\", it is a service name.\nDo not change or translate \"HPLIP\", it is a subsystem name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 129, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 48, "source_unit": "https://l10n.opensuse.org/api/units/12581891/?format=api", "priority": 100, "id": 2419610, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=e006272b9fb7f6e0", "url": "https://l10n.opensuse.org/api/units/2419610/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "The hpoj driver requires the PTAL system to be set up and running.\nIn particular, the ptal service must be up and running.\n\nBefore the ptal service can be started, the PTAL system must be initialized.\nAdditionally, the ptal service should be activated for start when booting.\nThe PTAL system and the hplip service exclude each other.\nTherefore a running hplip service would be stopped and deactivated\nbefore the the PTAL system is initialized, activated, and started.\nAn automated initialization of the PTAL system is only safe for USB.\nIf you have a non-USB device or if the automated initialization for USB fails,\nset up the PTAL system manually.\nIf you have an all-in-one device (scanner+printer), note that\na running ptal service monopolizes the USB device file (e.g., /dev/usb/lp0),\nso the printer can no longer be addressed via the USB device file.\n\nShould the PTAL system for USB be initialized, activated, and started now?\n" ], "previous_source": "", "target": [ "Ovládač hpoj potrebuje bežiaci systém PTAL.\nObzvlášť služba ptal musí byť spustená.\n\nPredtým ako bude služba ptal spustená, systém PTAL musí byť inicializovaný.\nNavyše služba ptal by mala byť nakonfigurovaná aby sa spúšťala pri štarte.\nSystém PTAL a služba hplip sa navzájom vylučujú,\npreto služba hplip bude zastavená a deaktivovaná\npredtým, ako bude systém PTAL inicializovaný a spustený.\nAutomatizovaná inicializácia systému PTAL je bezpečná len pre USB.\nAk máte zariadenie iné ako USB, alebo automatická inicializácia pre USB zlyháva,\nnastavte systém PTAL manuálne.\nAk máte all-in-one zariadenie (skener+tlačiareň), uvedomte si,\nže bežiaca služba service si 'privlastňuje' súbor USB zariadenia (e.g., /dev/usb/lp0),\ntakže tlačiareň nemôže byť cez tento súbor naďalej adresovaná.\n\nMá byť systém PTAL pre USB teraz inicializovaný, aktivovaný a spustený?\n" ], "id_hash": -5385473855890102980, "content_hash": -5385473855890102980, "location": "src/modules/Scanner.rb:1915", "context": "", "note": "Message of a Popup::YesNo for scanners which should be set up with the hpoj driver\nDo not change or translate \"hpoj\", it is a driver name.\nDo not change or translate \"PTAL\", it is a subsystem name.\nDo not change or translate \"ptal\", it is a service name.\nDo not change or translate \"hplip\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 130, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 154, "source_unit": "https://l10n.opensuse.org/api/units/12581892/?format=api", "priority": 100, "id": 2419612, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=3542f40fc084653c", "url": "https://l10n.opensuse.org/api/units/2419612/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "There is at least one printer configuration that uses the hplip service.\nIt is possible to proceed but then the hplip service would be stopped\nand all print queues that use the hplip service would no longer work.\nIf the scanner is also supported by the hpaio driver, do not proceed.\nInstead use hpaio to set up the scanner.\nAlternatively proceed and change the printer configuration to use the ptal service.\n" ], "previous_source": "", "target": [ "Máte aspoň jednu konfiguráciu skenera, ktorá používa službu hplip.\nJe možné pokračovať, ale v takom prípade bude služba hplip zastavená\na všetky tlačové fronty, ktoré ju používajú, nebudú ďalej fungovať.\nAk je skener podporovaný aj ovládačom hpaio, nepokračujte.\nNa nastavenie skenera radšej použite ovládač hpaio.\nMôžte tiež pokračovať a zmeniť konfiguráciu skenera na používanie služby ptal.\n" ], "id_hash": -5674606619569471867, "content_hash": -5674606619569471867, "location": "src/modules/Scanner.rb:1938", "context": "", "note": "Message of a Popup::ContinueCancel for scanners which should be set up with the hpoj driver.\nDo not change or translate \"hplip\", it is a service name.\nDo not change or translate \"hpaio\", it is a driver name.\nDo not change or translate \"ptal\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 131, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 71, "source_unit": "https://l10n.opensuse.org/api/units/12581893/?format=api", "priority": 100, "id": 2419614, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=313fbf58487b3e85", "url": "https://l10n.opensuse.org/api/units/2419614/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Setting Up Driver %1" ], "previous_source": "", "target": [ "Nastavujem ovládač %1" ], "id_hash": 6626185042598185421, "content_hash": 6626185042598185421, "location": "src/modules/Scanner.rb:1974", "context": "", "note": "%1 will be replaced by the backend name", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 132, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 4, "source_unit": "https://l10n.opensuse.org/api/units/12581894/?format=api", "priority": 100, "id": 2419616, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=dbf4f030701249cd", "url": "https://l10n.opensuse.org/api/units/2419616/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Check whether additional packages must be installed" ], "previous_source": "", "target": [ "Overiť, či je potrebné nainštalovať ďalšie balíky" ], "id_hash": -2691590574659066874, "content_hash": -2691590574659066874, "location": "src/modules/Scanner.rb:1978", "context": "", "note": "", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 133, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581895/?format=api", "priority": 100, "id": 2419618, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=5aa58ca20ca82406", "url": "https://l10n.opensuse.org/api/units/2419618/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Check whether firmware upload is required" ], "previous_source": "", "target": [ "Overiť, či je potrebné nahratie firmvéru" ], "id_hash": -7708449197766813785, "content_hash": -7708449197766813785, "location": "src/modules/Scanner.rb:1980", "context": "", "note": "2. progress stage name of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 134, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581896/?format=api", "priority": 100, "id": 2419620, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=1506164bb5f6d7a7", "url": "https://l10n.opensuse.org/api/units/2419620/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Test and set up special requirements for particular drivers" ], "previous_source": "", "target": [ "Otestovať a nastaviť špeciálne podmienky pre jednotlivé ovládače" ], "id_hash": -3141849563258885606, "content_hash": -3141849563258885606, "location": "src/modules/Scanner.rb:1982", "context": "", "note": "3. progress stage name of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 135, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 9, "source_unit": "https://l10n.opensuse.org/api/units/12581897/?format=api", "priority": 100, "id": 2419622, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=5465e877ec3cea1a", "url": "https://l10n.opensuse.org/api/units/2419622/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Activate the driver" ], "previous_source": "", "target": [ "Aktivácia ovládača" ], "id_hash": 7128499841077769319, "content_hash": 7128499841077769319, "location": "src/modules/Scanner.rb:1984", "context": "", "note": "4. progress stage name of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 136, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 3, "source_unit": "https://l10n.opensuse.org/api/units/12581898/?format=api", "priority": 100, "id": 2419624, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=e2ed84d648de7467", "url": "https://l10n.opensuse.org/api/units/2419624/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Checking whether additional packages must be installed..." ], "previous_source": "", "target": [ "Kontrolujem, či je musia byť nainštalované ďalšie balíky..." ], "id_hash": -9125811272496513264, "content_hash": -9125811272496513264, "location": "src/modules/Scanner.rb:1989", "context": "", "note": "1. progress stage name of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 137, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581899/?format=api", "priority": 100, "id": 2419626, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=015a9aff8f96ff10", "url": "https://l10n.opensuse.org/api/units/2419626/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Checking whether firmware upload is required..." ], "previous_source": "", "target": [ "Kontrolujem, či je potrebné nahratie firmvéru..." ], "id_hash": -661412690724567035, "content_hash": -661412690724567035, "location": "src/modules/Scanner.rb:1991", "context": "", "note": "2. progress step progress bar title of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 138, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581900/?format=api", "priority": 100, "id": 2419628, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=76d230a97f6d4805", "url": "https://l10n.opensuse.org/api/units/2419628/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Testing and setting up special requirements for particular drivers..." ], "previous_source": "", "target": [ "Testujú a nastavujú sa špeciálne podmienky pre jednotlivé ovládače..." ], "id_hash": -9085720589161677718, "content_hash": -9085720589161677718, "location": "src/modules/Scanner.rb:1993", "context": "", "note": "3. progress step progress bar title of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 139, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 9, "source_unit": "https://l10n.opensuse.org/api/units/12581901/?format=api", "priority": 100, "id": 2419630, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=01e909432a90bc6a", "url": "https://l10n.opensuse.org/api/units/2419630/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Activating the driver..." ], "previous_source": "", "target": [ "Aktivujem ovládač..." ], "id_hash": 4248515941297408627, "content_hash": 4248515941297408627, "location": "src/modules/Scanner.rb:1997", "context": "", "note": "4. progress step progress bar title of a Progress::New:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 140, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 3, "source_unit": "https://l10n.opensuse.org/api/units/12581902/?format=api", "priority": 100, "id": 2419632, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=baf5c2bd2f9dca73", "url": "https://l10n.opensuse.org/api/units/2419632/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:37Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Required Package Not Installed" ], "previous_source": "", "target": [ "Potrebný balík nie je nainštalovaný" ], "id_hash": 3777209297419394770, "content_hash": 3777209297419394770, "location": "src/modules/Scanner.rb:2018", "context": "", "note": "the third-party Image Scan driver software from Epson/Avasys:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 141, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 4, "source_unit": "https://l10n.opensuse.org/api/units/12581903/?format=api", "priority": 100, "id": 2419634, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=b46b57d7eefc5ed2", "url": "https://l10n.opensuse.org/api/units/2419634/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "The driver %1 requires the package %2." ], "previous_source": "", "target": [ "Ovládač %1 potrebuje balík %2." ], "id_hash": -1832163102550855871, "content_hash": -1832163102550855871, "location": "src/modules/Scanner.rb:2026", "context": "", "note": "Body of a Popup::AnyMessage where\n%1 will be replaced by the backend name\n%2 will be replaced by the package name\nOnly a simple message because before there was a dialog\nwhich let the user install the package so that this message is shown\nif the user has explicitly rejected to install it.", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 142, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 7, "source_unit": "https://l10n.opensuse.org/api/units/12581904/?format=api", "priority": 100, "id": 2419636, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=6692d95d8de0ef41", "url": "https://l10n.opensuse.org/api/units/2419636/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Aborted" ], "previous_source": "", "target": [ "Prerušené" ], "id_hash": -1851427209754883300, "content_hash": -1851427209754883300, "location": "src/modules/Scanner.rb:2032, src/modules/Scanner.rb:2073, src/modules/Scanner.rb:2106, src/modules/Scanner.rb:2117", "context": "", "note": "The ptal service is associated with the hpoj backend.\nIt may happen that the conflicting service hplip is in use by the printing system.\nThe hplip service is associated with the hpaoi backend.\nActivate the backend via bash script:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 143, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 1, "source_unit": "https://l10n.opensuse.org/api/units/12581905/?format=api", "priority": 100, "id": 2419638, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=664e68c313114b1c", "url": "https://l10n.opensuse.org/api/units/2419638/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Firmware Upload Required" ], "previous_source": "", "target": [ "Potrebné nahratie firmvéru" ], "id_hash": -3159122480353654839, "content_hash": -3159122480353654839, "location": "src/modules/Scanner.rb:2052", "context": "", "note": "Some scanners require a firmware upload to become ready to operate.\nWhen building the sane package ':firmware \"required\"' entries have been\nadded for the respective scanners to the appropriate descriptions files.\nSee the sane.spec file of the sane package.\nThis makes only sense if a database_index was specified\nbecause which scanner requires firmware upload is stored in the database\nand additionally user confirmation must be requested.\nOtherwise skip this section.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 144, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 3, "source_unit": "https://l10n.opensuse.org/api/units/12581906/?format=api", "priority": 100, "id": 2419640, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=54288ad78491c7c9", "url": "https://l10n.opensuse.org/api/units/2419640/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "If the ptal service is not running, the scanner cannot work." ], "previous_source": "", "target": [ "Ak nie je služba ptal spustená, skener nebude pracovať." ], "id_hash": 7175041647810082304, "content_hash": 7175041647810082304, "location": "src/modules/Scanner.rb:2096", "context": "", "note": "Message of a Popup::Warning for scanners which should be set up with the hpoj backend.\nOnly a simple message because before there was a Popup::YesNo\nwhich asked the user whether he wants to let YaST activate the ptal service\nso that this message is shown if the user has explicitly rejected to do it.\nDo not change or translate \"ptal\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 145, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 11, "source_unit": "https://l10n.opensuse.org/api/units/12581907/?format=api", "priority": 100, "id": 2419642, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=e392de5d1a5a7600", "url": "https://l10n.opensuse.org/api/units/2419642/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "The following scanners use the same driver.\nTherefore all those scanners will be deactivated:" ], "previous_source": "", "target": [ "Nasledovné skenery používajú ten istý ovládač.\nPreto budú všetky tieto skenery deaktivované:" ], "id_hash": 4500828722560963427, "content_hash": 4500828722560963427, "location": "src/modules/Scanner.rb:2191", "context": "", "note": "Header message for a list of scanners which will be deactivated:", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 146, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 14, "source_unit": "https://l10n.opensuse.org/api/units/12581908/?format=api", "priority": 100, "id": 2419646, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=be7627e0731f1363", "url": "https://l10n.opensuse.org/api/units/2419646/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "The driver hpoj is deactivated but the associated service ptal is not deactivated because it is needed by the CUPS printing system." ], "previous_source": "", "target": [ "Ovládač hpoj je deaktivovaný, ale príslušná služba ptal nie je deaktivovaná, pretože je potrebná pre tlačový systém CUPS." ], "id_hash": 4756263828363323140, "content_hash": 4756263828363323140, "location": "src/modules/Scanner.rb:2259", "context": "", "note": "Only a simple message because everything is perfectly o.k.\nbut the user should get a notification\nwhy the ptal service must be still active.\nThis works only if the CUPS printing system is used.\nDo not change or translate \"hpoj\", it is a driver name.\nDo not change or translate \"ptal\", it is a service name.\nDo not change or translate \"CUPS\", it is a subsystem name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 147, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 22, "source_unit": "https://l10n.opensuse.org/api/units/12581909/?format=api", "priority": 100, "id": 2419648, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=c201a4c08ba2a704", "url": "https://l10n.opensuse.org/api/units/2419648/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Failed to stop the ptal service." ], "previous_source": "", "target": [ "Zastavenie služby ptal zlyhalo." ], "id_hash": -587052834702632924, "content_hash": -587052834702632924, "location": "src/modules/Scanner.rb:2274", "context": "", "note": "(i.e. a system which is not totally broken or totally messed up).\nDo not change or translate \"ptal\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 148, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581910/?format=api", "priority": 100, "id": 2419650, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=77da5e8ea329d824", "url": "https://l10n.opensuse.org/api/units/2419650/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "Failed to disable the ptal service." ], "previous_source": "", "target": [ "Vypnutie služby ptal zlyhalo." ], "id_hash": 334208146655999911, "content_hash": 334208146655999911, "location": "src/modules/Scanner.rb:2285", "context": "", "note": "(i.e. a system which is not totally broken or totally messed up).\nDo not change or translate \"ptal\", it is a service name.", "flags": "", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 149, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 6, "source_unit": "https://l10n.opensuse.org/api/units/12581911/?format=api", "priority": 100, "id": 2419652, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=84a35889e678f7a7", "url": "https://l10n.opensuse.org/api/units/2419652/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" }, { "translation": "https://l10n.opensuse.org/api/translations/yast-scanner/master/sk/?format=api", "source": [ "No Scanner for %1" ], "previous_source": "", "target": [ "Žiaden skener pre %1" ], "id_hash": -6741619051914277258, "content_hash": -6741619051914277258, "location": "src/modules/Scanner.rb:2344", "context": "", "note": "If there is no active scanner for the backend\nthen show a message but exit successfully because\nit is no error when there is no active scanner for the backend:", "flags": "ycp-format", "labels": [], "state": 20, "fuzzy": false, "translated": true, "approved": false, "position": 150, "has_suggestion": false, "has_comment": false, "has_failing_check": false, "num_words": 4, "source_unit": "https://l10n.opensuse.org/api/units/12581912/?format=api", "priority": 100, "id": 2419654, "web_url": "https://l10n.opensuse.org/translate/yast-scanner/master/sk/?checksum=2270f530dfa4ce76", "url": "https://l10n.opensuse.org/api/units/2419654/?format=api", "explanation": "", "extra_flags": "", "pending": false, "timestamp": "2016-09-16T14:23:38Z" } ] }