Units

HTTP 200 OK
Allow: GET, POST, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 463,
    "next": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/units/?format=api&page=2",
    "previous": null,
    "results": [
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Configuration of printer"
            ],
            "previous_source": "",
            "target": [
                "Konfigurimi i printerit"
            ],
            "id_hash": -8635156998187170094,
            "content_hash": -8635156998187170094,
            "location": "src/clients/printer.rb:53",
            "context": "",
            "note": "Command line help text for the printer module",
            "flags": "",
            "state": 20,
            "fuzzy": false,
            "translated": true,
            "approved": false,
            "position": 1,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "source_unit": "https://l10n.opensuse.org/api/units/12579837/?format=api",
            "priority": 100,
            "id": 2127822,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=829c2760f5346d2",
            "url": "https://l10n.opensuse.org/api/units/2127822/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Error: Failed to write /etc/cups/cupsd.conf"
            ],
            "previous_source": "",
            "target": [
                "Gabim: Dështoi në shkruajtjen e /etc/cups/cupsd.conf"
            ],
            "id_hash": 5434407496414427861,
            "content_hash": 5434407496414427861,
            "location": "src/clients/printer_auto.rb:250",
            "context": "",
            "note": "Write the AutoYaST related printer settings to the system\naccording to the Printer::autoyast_printer_settings_import map\nwhich was stored by a previous call of the Import function by AutoYaST\nor reset to an empty map by a previous call of the Reset function.",
            "flags": "",
            "state": 20,
            "fuzzy": false,
            "translated": true,
            "approved": false,
            "position": 2,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 5,
            "source_unit": "https://l10n.opensuse.org/api/units/12579838/?format=api",
            "priority": 100,
            "id": 2127824,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=cb6ae4d344807ad5",
            "url": "https://l10n.opensuse.org/api/units/2127824/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Error: Failed to write /etc/cups/client.conf"
            ],
            "previous_source": "",
            "target": [
                "Gabim: Dështoi të shkruajë  /etc/cups/client.conf"
            ],
            "id_hash": -5992589549180408997,
            "content_hash": -5992589549180408997,
            "location": "src/clients/printer_auto.rb:269",
            "context": "",
            "note": "",
            "flags": "",
            "state": 20,
            "fuzzy": false,
            "translated": true,
            "approved": false,
            "position": 3,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": true,
            "num_words": 5,
            "source_unit": "https://l10n.opensuse.org/api/units/12579839/?format=api",
            "priority": 100,
            "id": 2127826,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=2cd60b8e1c622b5b",
            "url": "https://l10n.opensuse.org/api/units/2127826/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Warning: Cannot read %1 (file may not exist)."
            ],
            "previous_source": "",
            "target": [
                "Paralajmërim: Nuk mund të lexojë %1 (skedari mund të mos ekzistojë)."
            ],
            "id_hash": -5010184686422891034,
            "content_hash": -5010184686422891034,
            "location": "src/clients/printer_auto.rb:307",
            "context": "",
            "note": "which is added to its \"Summary\" text for AutoYaST\nwhere %1 is replaced by the file name which cannot be read.",
            "flags": "ycp-format",
            "state": 20,
            "fuzzy": false,
            "translated": true,
            "approved": false,
            "position": 4,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 8,
            "source_unit": "https://l10n.opensuse.org/api/units/12579840/?format=api",
            "priority": 100,
            "id": 2127828,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=3a783f92a2a965e6",
            "url": "https://l10n.opensuse.org/api/units/2127828/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Error: Failed to read %1 (possibly empty file)."
            ],
            "previous_source": "",
            "target": [
                "Gabim: Dështoi të lexojë %1 (mbase skedar bosh)."
            ],
            "id_hash": -9138374397478807625,
            "content_hash": -9138374397478807625,
            "location": "src/clients/printer_auto.rb:342",
            "context": "",
            "note": "which is added to its \"Summary\" text for AutoYaST\nwhere %1 is replaced by the file name which cannot be read.",
            "flags": "ycp-format",
            "state": 20,
            "fuzzy": false,
            "translated": true,
            "approved": false,
            "position": 5,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 8,
            "source_unit": "https://l10n.opensuse.org/api/units/12579841/?format=api",
            "priority": 100,
            "id": 2127830,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=12df8e715c057b7",
            "url": "https://l10n.opensuse.org/api/units/2127830/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Warning: Failed to backup %1 as %1.yast2save"
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": -8520353429415664010,
            "content_hash": -8520353429415664010,
            "location": "src/clients/printer_auto.rb:377",
            "context": "",
            "note": "which is added to its \"Summary\" text for AutoYaST\nwhere %1 is replaced by the file name.",
            "flags": "ycp-format",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 6,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 7,
            "source_unit": "https://l10n.opensuse.org/api/units/12579842/?format=api",
            "priority": 100,
            "id": 2127832,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=9c19fb2dee5e676",
            "url": "https://l10n.opensuse.org/api/units/2127832/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Warning: Failed to backup %1 as %1.yast2orig"
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": 3114910249735695867,
            "content_hash": 3114910249735695867,
            "location": "src/clients/printer_auto.rb:400",
            "context": "",
            "note": "which is added to its \"Summary\" text for AutoYaST\nwhere %1 is replaced by the file name.",
            "flags": "ycp-format",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 7,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 7,
            "source_unit": "https://l10n.opensuse.org/api/units/12579843/?format=api",
            "priority": 100,
            "id": 2127834,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=ab3a625e5eb82dfb",
            "url": "https://l10n.opensuse.org/api/units/2127834/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Cannot configure printing (required package cups-client is not installed)."
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": -2240652947829056643,
            "content_hash": -2240652947829056643,
            "location": "src/clients/printer_proposal.rb:91",
            "context": "",
            "note": "Propose configuration for each local printer:\nCheck if the packages cups-client and cups are installed\nand skip the automated queue setup if one of them is missing, see\nhttps://bugzilla.novell.com/show_bug.cgi?id=445719#c13\nIf cups-client is missing, it would run into an endless sequence of errors.\nIf cups is missing, there can be no local running cupsd which is\nmandatory to set up local print queues.",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 8,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 9,
            "source_unit": "https://l10n.opensuse.org/api/units/12579844/?format=api",
            "priority": 100,
            "id": 2127836,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=60e79a03f3b79b7d",
            "url": "https://l10n.opensuse.org/api/units/2127836/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Cannot configure local printers (required package cups is not installed)."
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": 4107381930516397904,
            "content_hash": 4107381930516397904,
            "location": "src/clients/printer_proposal.rb:101",
            "context": "",
            "note": "",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 9,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 10,
            "source_unit": "https://l10n.opensuse.org/api/units/12579845/?format=api",
            "priority": 100,
            "id": 2127838,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=b9005a1a9d49bf50",
            "url": "https://l10n.opensuse.org/api/units/2127838/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "No local printer accessible (using remote CUPS server '%1' for printing)."
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": 4324779653237383973,
            "content_hash": 4324779653237383973,
            "location": "src/clients/printer_proposal.rb:116",
            "context": "",
            "note": "Skip automated queue setup when it is a client-only config:",
            "flags": "ycp-format",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 10,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 11,
            "source_unit": "https://l10n.opensuse.org/api/units/12579846/?format=api",
            "priority": 100,
            "id": 2127840,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=bc04b42e530d2325",
            "url": "https://l10n.opensuse.org/api/units/2127840/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Started the CUPS daemon.\nWaiting half a minute for the CUPS daemon to get ready to operate...\n"
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": -8378595151412763527,
            "content_hash": -8378595151412763527,
            "location": "src/clients/printer_proposal.rb:161, src/modules/Printerlib.rb:352",
            "context": "",
            "note": "Wait half a minute for a new started cupsd:\nWait half a minute for a new started cupsd is necessary because\nwhen a client-only config is switched to a \"get Browsing info\" config\nthe BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds\nso that the local cupsd should listen at least 31 seconds to get Browsing info\nbefore e.g. the Overview dialog can be shown with the right current queues.",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 11,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 17,
            "source_unit": "https://l10n.opensuse.org/api/units/12579847/?format=api",
            "priority": 100,
            "id": 2127842,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=bb94019fb3b6479",
            "url": "https://l10n.opensuse.org/api/units/2127842/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "The CUPS daemon is not yet accessible.\nWaiting one minute so that it is ready to operate..."
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": 4117182175245625202,
            "content_hash": 4117182175245625202,
            "location": "src/clients/printer_proposal.rb:175, src/modules/Printerlib.rb:368",
            "context": "",
            "note": "for the very first time (e.g. on a new installed system)\nuntil the cupsd is actually ready to operate.\nE.g. because parsing of thousands of PPDs may need much time.\nTherefore enforce waiting one minute now.\n(Plain busy message without title.)\nfor the very first time (e.g. on a new installed system)\nuntil the cupsd is actually ready to operate.\nE.g. because parsing of thousands of PPDs may need much time.\nTherefore enforce waiting one minute now.\n(Plain busy message without title.)",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 12,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 17,
            "source_unit": "https://l10n.opensuse.org/api/units/12579848/?format=api",
            "priority": 100,
            "id": 2127844,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=b9232b5fe715e772",
            "url": "https://l10n.opensuse.org/api/units/2127844/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Cannot configure local printers (no local cupsd accessible)."
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": 6253215582301122900,
            "content_hash": 6253215582301122900,
            "location": "src/clients/printer_proposal.rb:195",
            "context": "",
            "note": "Skip automated queue setup when the cupsd is not accessible up to now.\nA special case is when the cupsd does not listen on the official IANA IPP port (631).\nThen Printerlib::GetAndSetCupsdStatus(\"\") returns false because it calls\n\"lpstat -h localhost -r\" which fails (\"-h localhost:port\" would have to be used).\nThe YaST printer module does not support when the cupsd listens on a non-official port\nso that also in this special case no automated queue setup is done.",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 13,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 8,
            "source_unit": "https://l10n.opensuse.org/api/units/12579849/?format=api",
            "priority": 100,
            "id": 2127846,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=d6c7e270eefef154",
            "url": "https://l10n.opensuse.org/api/units/2127846/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "No local printer detected."
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": 8174465318380324706,
            "content_hash": 8174465318380324706,
            "location": "src/clients/printer_proposal.rb:222",
            "context": "",
            "note": "with an empty URI (i.e. no need to test this here)\nbut Printer::ConnectionItems adds trailing spaces\nbecause the current YaST UI has almost no additional\nspace between table columns:",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 14,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 4,
            "source_unit": "https://l10n.opensuse.org/api/units/12579850/?format=api",
            "priority": 100,
            "id": 2127848,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=f17188e59acf4762",
            "url": "https://l10n.opensuse.org/api/units/2127848/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Creating New Printer Setup"
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": -2797847033399885658,
            "content_hash": -2797847033399885658,
            "location": "src/clients/printer_proposal.rb:339, src/include/printer/basicadd.rb:422, src/include/printer/basicadd.rb:813",
            "context": "",
            "note": "Since CUPS 1.4 the new DirtyCleanInterval directive controls\nthe delay when cupsd updates config files (see basicadd.ycp).\nSince CUPS 1.4 the new DirtyCleanInterval directive controls the delay when cupsd updates config files:\nSince CUPS 1.4 the new DirtyCleanInterval directive controls the delay when cupsd updates config files:",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 15,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 4,
            "source_unit": "https://l10n.opensuse.org/api/units/12579851/?format=api",
            "priority": 100,
            "id": 2127850,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=592c0cf25e51c0a6",
            "url": "https://l10n.opensuse.org/api/units/2127850/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "New Printer Configuration not yet Stored in the System"
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": 4621660958067320179,
            "content_hash": 4621660958067320179,
            "location": "src/clients/printer_proposal.rb:342, src/include/printer/basicadd.rb:425, src/include/printer/basicadd.rb:816",
            "context": "",
            "note": "",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 16,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 9,
            "source_unit": "https://l10n.opensuse.org/api/units/12579852/?format=api",
            "priority": 100,
            "id": 2127852,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=c02370279de4e573",
            "url": "https://l10n.opensuse.org/api/units/2127852/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "This may result broken printer configurations."
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": 4216936307515859192,
            "content_hash": 4216936307515859192,
            "location": "src/clients/printer_proposal.rb:346",
            "context": "",
            "note": "Explanation details of a Popup::ErrorDetails.",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 17,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 6,
            "source_unit": "https://l10n.opensuse.org/api/units/12579853/?format=api",
            "priority": 100,
            "id": 2127854,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=ba85913ab9ee20f8",
            "url": "https://l10n.opensuse.org/api/units/2127854/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Found existing configuration"
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": -5132975155154256480,
            "content_hash": -5132975155154256480,
            "location": "src/clients/printer_proposal.rb:388",
            "context": "",
            "note": "has almost no additional space between table columns:",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 18,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 3,
            "source_unit": "https://l10n.opensuse.org/api/units/12579854/?format=api",
            "priority": 100,
            "id": 2127856,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=38c4024ac41ffda0",
            "url": "https://l10n.opensuse.org/api/units/2127856/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "Created configuration"
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": -1164250916242435404,
            "content_hash": -1164250916242435404,
            "location": "src/clients/printer_proposal.rb:396",
            "context": "",
            "note": "",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 19,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 2,
            "source_unit": "https://l10n.opensuse.org/api/units/12579855/?format=api",
            "priority": 100,
            "id": 2127858,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=6fd7bff5cbf252b4",
            "url": "https://l10n.opensuse.org/api/units/2127858/?format=api",
            "explanation": "",
            "extra_flags": ""
        },
        {
            "translation": "https://l10n.opensuse.org/api/translations/yast-printer/master/sq/?format=api",
            "source": [
                "No local printer configured."
            ],
            "previous_source": "",
            "target": [
                ""
            ],
            "id_hash": -2722739082314770527,
            "content_hash": -2722739082314770527,
            "location": "src/clients/printer_proposal.rb:409",
            "context": "",
            "note": "",
            "flags": "",
            "state": 0,
            "fuzzy": false,
            "translated": false,
            "approved": false,
            "position": 20,
            "has_suggestion": false,
            "has_comment": false,
            "has_failing_check": false,
            "num_words": 4,
            "source_unit": "https://l10n.opensuse.org/api/units/12579856/?format=api",
            "priority": 100,
            "id": 2127860,
            "web_url": "https://l10n.opensuse.org/translate/yast-printer/master/sq/?checksum=5a36e33af68e17a1",
            "url": "https://l10n.opensuse.org/api/units/2127860/?format=api",
            "explanation": "",
            "extra_flags": ""
        }
    ]
}