Loading…
cnzhx
Suggestion accepted |
|
sle-merge-robot
Suggestion added |
|
Loading…
cnzhx
Suggestion accepted |
|
sle-merge-robot
Suggestion added |
|
A normal USB scanner should be detected automatically.
By default, only those USB scanners are shown
for which the USB vendor and product IDs are known.
If a USB scanner is not shown or if there are unexpected results,
try <b>Other</b> and <b>Restart Detection</b>.
It might happen that particular USB devices which are not scanners
are shown too. There is no generic way to reliably distinguish a scanner
from other USB devices because there is no USB device class for scanners.
Try to proceed with <b>Add</b>.
For HP all-in-one devices you may have to run <tt>hp-setup</tt>
via <b>Other</b> and <b>Run hp-setup</b> before you can
configure the scanner unit with this tool.
If you have difficulties configuring your scanner,
check whether it appears in the output of <tt>lsusb</tt>.
If it is not listed there, the USB system cannot communicate with the scanner.
</p>
一般的 USB 扫描仪应该
会被可被系统自动检测到。默认情况下,只系统默认只会显示 USB厂供应商和产品 ID 已知的 USB 扫描仪。如果一款 USB 扫描仪
没未显示或有非预期的结果,请尝试使用<b>其
它他</b>和<b>重新检测</b>。有时可能也显示某些不是扫描仪的 USB 设备。没有通用的方法可以有效
的地区分扫描仪和其他 USB 设备,因为没有针对扫描仪的 USB 设备类。
请尝试通过<b>添加</b>继续。
若如果是惠普多合一设备功能一体机,您可能需要先通过和和<b>运行 hp-setup</b> 选项运行 <tt>hp-setup</tt>,然后才能通过此工具配置扫描仪单元。
如果您配置扫描仪出现了问题,请检查它是否出现在了 <tt>lsusb</tt> 的输出中。
如果输出中未列出,则表示 USB 系统不能与扫描仪通
信讯。</p>