Zen

Translation

User <h1>Authentication</h1>
English summary item
<h1>Authentication</h1>
24/230 · 23

Sign in to save the translation.

English Belarusian Actions
<p><b><big>Aborting Saving</big></b><br>
Abort the save procedure by pressing <b>Abort</b>.
An additional dialog informs whether it is safe to do so.
</p>
 
<p><b><big>iSCSI Initiator Configuration</big></b><br>
Configure an iSCSI initiator here.<br></p>
 
<p><b><big>Adding an iSCSI Initiator</big></b><br>
Select an iSCSI initiator from the list of detected initiators.
If your iSCSI initiator was not detected, use <b>Other (not detected)</b>.
Then press <b>Configure</b>.</p>
 
<p><b><big>Editing or Deleting</big></b><br>
If you press <b>Edit</b>, an additional dialog in which to change
the configuration opens.</p>
 
<p><b><big>iSCSI Initiator Configuration Overview</big></b><br>
Obtain an overview of installed iSCSI initiators. Additionally
edit their configurations.<br></p>
 
<p><b><big>Adding an iSCSI Initiator</big></b><br>
Press <b>Add</b> to configure an iSCSI initiator.</p>
 
<p><b><big>Editing or Deleting</big></b><br>
Choose an iSCSI Initiator to change or remove.
Then press <b>Edit</b> or <b>Delete</b> as desired.</p>
 
<p>List of current sessions.</p><p>Use the <b>Add</b> button to get additional targets. A discovery is started to detect new targets and the start-up mode of already connected targets keeps unchanged.<br>Use <b>Disconnect</b> to cancel the connection and with it remove the target from the list.<br>To change the start-up status, press <b>Edit</b>.</p>
 
<h1>Warning</h1>
 
<p>When accessing an iSCSI device <b>READ</b>/<b>WRITE</b>, make sure that this access is exclusive. Otherwise there is a potential risk of data corruption.</p>
 
<p><b>Initiator Name</b> is a value from <tt>/etc/iscsi/initiatorname.iscsi</tt>.
In case you have iBFT, this value will be added from there and you are only able to change it in the BIOS setup.</p>
 
If you want to use <b>iSNS</b> (Internet Storage Name Service) for discovering targets instead of the default SendTargets method,
fill in the IP address of the iSNS server and port. The default port should be 3205.
 
Enter the <b>IP Address</b> of the iSCSI target server.
Only change <b>Port</b>. If you do not need authentication,
select <b>No Discovery Authentication</b>.
 
List of nodes offered by the iSCSI target. Select one item and click <b>Connect</b>.
 
<h1>Startup</h1>
 
<h1>Authentication</h1>
Аўтэнтыфікацыя карыстача
<p>The default setting here is <i>No Authentication</i>. Uncheck the checkbox if authentication is needed for security reasons.
 
<p>This screen shows the list of discovered targets.</p><p>Use the <b>Discovery</b> button to get available iSCSI targets from a server specified by IP address.<br><b>Connect</b> to a target to establih the connection. If login was successful the column <i>Connected</i> shows status 'True' and the target will appear on the <i>Connected Targets</i> screen.<br>To remove a target use the <b>Delete</b> button.<br> <b>Hint:</b> Removing of targets is only possible for not connected onces. If required, <b>Disconnect</b> at <i>Connected Targets</i> first.</p><p><b>Please note:</b> Starting the <b>Discovery</b> again means doing a re-discovery of targets which possibly will change the start-up mode of already connected targets (to default 'manual'). Switch to <i>Connected Targets</i> screen and use the <b>Add</b> button if you want to add new targets without changing the start-up mode.</p>
 
<h1>iBTF</h1>
 
Insert the username.
 
Insert the password.
 
Error While Connecting iscsid
 
Really log out from the selected target?
 
Error occurred while logging out from the selected target.
 
No record found.
 
No valid IP address
 
Port field cannot be empty
 
Incorrect Initiator Name
 

The correct syntax is
iqn.yyyy-mm.reversed.domain.name[:identifier]
or eui.yyyy-mm.reversed.domain.name[:identifier]

Example:
iqn.2007-04.cz.server:storage.disk.sdb

Do you want to use the name?
 
Insert the IP address.
 
Please check IP address resp. host name.
 

Loading…

No matching activity found.
Browse all string changes

Things to check

XML markup

XML tags in translation do not match source

Reset

Glossary

English Belarusian
No related strings found in the glossary.

String information

Source string description
summary item
Source string location
src/include/iscsi-client/helps.rb:152
String age
7 years ago
Last updated
a month ago
Source string age
7 years ago
Translation file
po/iscsi-client/be.po, string 58